Delivery time: 1-3 days
Product category "as new":
Item in perfect condition; packaging may be damaged or opened. The item is fully functional and all function-relevant accessories are complete.
iCarsoft MB V3.0 for Mercedes, Smart, commercial vehicles: Sprinter, Vito, etc.
Professional Deep Diagnostic Device iCarsoft MB V3.0
Oil Service, SBC, DPF Reset, Bleed Brakes, Injector Coding
The iCarsoft MB V3.0 is the further development of the iCarsoft MB V2.0. Compared to the i980, the MB V3.0 has additional functions: Oil Service Reset, Brake Reset SBC Reset, Brake Bleeding, Injector Coding and DPF Reset
The MB V3.0 offers more comprehensive software features and has also been further simplified in handling.
This diagnostic device is specially designed for Mercedes Benz, Mercedes commercial vehicles and Smart vehicles and offers extended functions and access to all control units. However, it can also be used universally for OBD2 access to the engine control unit in all vehicle brands! It clears the orange engine warning light in all brands
Our MB V3.0 enables diagnostics on all installed control units (FULL ECU Diagnostics)
OBD2 diagnostic devices only allow access to the engine control unit and only clear errors when the orange engine light is on. The iCarsoft MB V3.0 offers access to almost all control units (engine, ABS, airbag and transmission, etc.). We will gladly email you the complete list of functions.
The iCarsoft MB V3.0 has access to almost all control units installed in the vehicle, including:
- Engine and transmission control unit, ABS, airbag, instrument cluster, etc.
- Diesel Particulate Filter Regeneration (DPF)
- ETC Electronic Throttle Control learning
- EPB Parking Brake Function Reset
- Steering Angle Sensor calibration learning
- Injector coding
- Bleeding brakes (SBC)
- TPMS (Tire Pressure Monitoring) activation
- Adjusting air suspension
- Transmission adaptation
- Live Data function (e.g. various temperature displays, air mass, engine speed, fuel system status, etc.)
- Service Reset function (reset intervals, clear warning display)
- reading and clearing of generic and manufacturer-specific fault codes
- and much more…(see below)
with OBD II function (thus also usable for many other vehicle brands)
Our iCarsoft MB V3.0 is also an OBD2 diagnostic device. Thus, it is also possible to diagnose the engine control system independently of the manufacturer!
It is therefore possible to access the engine control unit in all European vehicles of all vehicle manufacturers (petrol engines from model year 2001 and diesel engines from model year 2004) with ODB II, which also makes the MB V3.0 a universally applicable diagnostic device.
Powerful hardware combined with high-quality iCarsoft MB V3.0 technology for a perfect diagnostic device.
Operating and reading the fault memory using just seven buttons is very simple and therefore also suitable for laypeople!
Errors are displayed directly on the color display. The display is in clear text in German. Check your vehicle yourself before a workshop visit. This way there are no more expensive surprises!
Do you do your inspections yourself? Then this is the ideal tool for you. Our diagnostic device resets the inspection indicator.
When resetting the service, it is possible to reset the service via the device or manually. The procedure is excellently described here.
In addition, the iCarsoft diagnostic device can also read live data during operation!
Our devices are up-to-date and are always delivered with an operating manual. You also have the option of downloading free updates later to always stay up to date. Thus, the device does not become obsolete, on the contrary, through updates the device learns and can even expand its previous functions!
Printing of stored data via PC printer.
The diagnostic device receives power only via the OBD socket of the vehicle, the diagnostic tool does not need any additional power source or a computer. It is immediately ready for operation!
This iCarsoft MB V3.0 diagnostic device was specially developed for hobby mechanics and is therefore very easy to use, which many professional workshops also enjoy. There is no fault code list necessary, as all fault codes are displayed in plain text. The device is of extremely high quality and combines only the best components, so it reliably performs its work even in daily continuous operation and you can enjoy a long service life.
The live display of sensor data is switchable, so that all relevant data are displayed in different views
Live data display of, for example:
- Fuel system status
- Intake air temperature
- Air mass / air flow
- Engine speed
- Vehicle speed
- O2 sensor position
- Coolant temperature
- Slow and fast correction
- etc…
The live data can of course also be read out while driving
This is indispensable in professional troubleshooting. The device even offers the possibility to save the fault memory and live data and view them later.
further advantages of our professional vehicle diagnostic tool:
- Easy-to-read color display
- Easy operation via seven buttons
- Error display in plain text and German
- Reads all fault codes (generic and manufacturer-specific codes)
- Clears all codes in the control unit
- DTC clear and data stream reading possible
- bidirectional "special tests" possible (e.g. EVAP, O2 sensor, I/M readiness, MIL status, VIN info, On Board Monitor Test)
- Resetting of inspection indicators, services possible
- immediately ready for operation, requires no batteries or laptop
- Updatable via Internet and thus in the future extensions of the previous functions possible. Printing of stored data via PC printer.
further supported control units:
- Engine electronics
- Airbag SRS
- Central electrics
- Automatic transmission
- ABS anti-lock braking system
- Auxiliary heater
- Central locking
- Air conditioning
- Rain sensor
- Diagnostic interface
- Navigation
- Radio
- Brake electronics
- Steering wheel electronics
- Immobilizer
- All-wheel drive
- Instrument cluster
- Sound system
- Steering angle sensor
- Clutch electronics
- Automatic headlight leveling
- Comfort system
- Parking aid
- Tire pressure
- Voice input system
- Wheel damping
- Chassis control
- Telephone
- Diesel pump
- Battery charger
- Roof electronics
- Alarm system
- TV tuner
- Power steering
- and much more…
The errors are displayed in German and plain text on a 4″ TFT LCD display! The device is Multi Lingual, 5 languages can be selected (German, English, Dutch, French, Spanish).
In addition, the diagnostic function includes reading DTCs, clearing DTCs, reading data stream and much more.
Furthermore, it also supports the following bidirectional "special tests" such as: EVAP, O2 sensor, I/M readiness, MIL status, VIN info and ON-BOARD-MONITOR tests. In addition to the powerful diagnostic function, our diagnostic device also has some special functions such as: Oil/Service light reset, EPB, SAS, etc.
It can also be updated to the latest version:
- Simply download the free update software from the manufacturer's website.
- Connect the device with the supplied USB cable and wait until the device serial number is automatically displayed.
- Start the update and update the device with the latest software version.
supported vehicles:
All vehicles must be OBD II capable!.
Access to engine control unit for:
- all European petrol vehicles from model year 2001 with OBD II
- all European diesel vehicles from model year 2004 with OBD II
Access to all control units for the following Mercedes Benz, Sprinter and Smart vehicle models:
- 107, 124, 126, 201
- A Class (W168, W169, W176, W177)
- AMG (190, 290, 298)
- B Class (242, 245, 246, 247)
- C Class (202, 203, 204, 205, 206)
- CL Class (215, 216,)
- CLA (217, 218)
- CLC (303)
- CLK Class (208, 209)
- CLS Class (218, 219, 257)
- E Class (207, 210, 211, 212, 213, 238)
- ED (243)
- EQC (293)
- G Class (461, 463, 464, 465)
- GL (164, 166)
- GLA (156, 247)
- GLB (247)
- GLC (253)
- GLE (167)
- GLK (204)
- GLS (167)
- M Class (163, 164, 166, 292)
- Maybach (240)
- R Class (251)
- S Class (140, 217, 220, 221, 222)
- SL Class (129, 230, 231)
- SLK Class (R170, R171, R172)
- SLR (199)
- SLS (197)
- Citan (415, 420)
- Sprinter (690.6, 901 to 906, 907, 909, 910)
- Vaneo (with OBD2 connection)
- Vito/ V Class/ Viano (447, 448, 638, 639)
- X (470, 471)
- Smart fortwo (A/C 450 and C/A 451)
- Smart Roadster (R/C 452)
- Smart (453)
- Smart forfour (W454)
Software status as of 09.04.2025: MB, Maybach V35.10, Mercedes LD (Commercial Vehicles) V34.00, Smart V33.00
Technical data:
- Display: 4 inch TFT LCD, 480 x 320 pixels, color monitor with backlight
- Operating temperature: 0 – 50 degrees C
- Storage temperature: -20 – 70 degrees C
- Power: 9V – 18V
- Voltage range: 12V DC (directly from vehicle via OBD interface)
- Operating current: 150mA 12V (typical)
- Power consumption: 1.8 W (typical)
- Dimensions: Length 205mm x Width 110mm x Height 31mm
- Cable length approx. 600mm
- Connector type: Standardized 16-pin OBD plug
- Weight: 350 grams
- Diagnostic device and manual
included in delivery:
- Diagnostic device iCarsoft MB V3.0
- 16-pin OBD 2 diagnostic cable
- high-quality carrying case
- USB cable
- Micro SD memory card
- Operating instructions German, English
- Technical documentation