Delivery time: 1-3 days
iCarsoft MB V3.0 for Mercedes, Smart, commercial vehicles: Sprinter, Vito, etc.
Professional in-depth diagnostic tool iCarsoft MB V3.0
Oil Service, SBC, DPF Reset, brake bleeding, injector coding
The iCarsoft MB V3.0 is the further development of the iCarsoft MB V2.0. Compared to the i980, the MB V3.0 has additional functions: oil service reset, brake reset SBC Reset, brake bleeding, injector coding and DPF reset
The MB V3.0 offers more comprehensive software features and has also been further simplified in handling.
This diagnostic tool is specially developed for Mercedes Benz, Mercedes commercial vehicles and Smart vehicles and offers extended functions and access to all control units. However, it can also be used universally for OBD2 access to the engine control unit in all vehicle brands! It clears the orange engine warning light in all brands.
Our MB V3.0 enables diagnostics on all installed control units (FULL ECU Diagnostics)
OBD2 diagnostic devices only allow access to the engine control unit and only clear errors if the orange engine light is on. The iCarsoft MB V3.0 offers access to almost all control units (engine, ABS, airbag and transmission, etc.). We will gladly email you the complete list of functions.
The iCarsoft MB V3.0 has access to almost all control units installed in the vehicle, including:
- Engine and transmission control units, ABS, airbag, instrument cluster, etc.
- Diesel Particulate Filter Regeneration (DPF)
- ETC Electronic Throttle Control learning
- EPB Parking Brake Function Reset
- Steering Angle Sensor calibration learning
- Injector coding
- Brake bleeding (SBC)
- TPMS (Tire Pressure Monitoring System) activation
- Air suspension adjustment
- Transmission adaptation
- Live Data function (e.g., various temperature displays, air mass, engine speed, fuel system status, etc.)
- Service Reset function (reset intervals, clear warning display)
- reading and clearing generic and manufacturer-specific fault codes
- and much more…(see below)
with OBD II function (thus also usable for many other vehicle brands)
Our iCarsoft MB V3.0 is also an OBD2 diagnostic device. This means it is also possible to diagnose the engine control system regardless of the manufacturer!
So you can access the engine control unit in all European vehicles of all manufacturers (petrol from model year 2001 and diesel from model year 2004) with ODB II, which also makes the MB V3.0 a universally applicable diagnostic device.
Powerful hardware combined with high-quality iCarsoft MB V3.0 technology for a perfect diagnostic device.
Operating and reading out the fault memories using just seven buttons is very easy and is therefore also suitable for laypeople!
Errors are displayed directly on the color display. The display is in plain text in German. Examine your vehicle yourself before a workshop visit for a check. This way there are no more expensive surprises!
Do you do your inspections yourself? Then this is the ideal tool for you. Our diagnostic device resets the inspection indicator.
When resetting the service, it is possible to reset the service via the device or alternatively manually. The procedure is excellently described here.
In addition, the iCarsoft diagnostic device can also read live data during operation!
Our devices are up-to-date and are always delivered with an instruction manual. You also have the option to download free updates later to always stay up-to-date. This means the device does not become obsolete; on the contrary, through updates, the device learns and can even expand its existing functions!
Printing of saved data via PC printer.
The diagnostic device receives power only via the OBD socket of the vehicle; the diagnostic tool does not require an additional power source or a computer. It is immediately ready for operation!
This iCarsoft MB V3.0 diagnostic device was specially developed for hobby mechanics and is therefore very easy to use, which many professional workshops also enjoy. No fault code list is necessary, as all fault codes are displayed in plain text. The device is of extremely high quality and combines only the best components, so it reliably performs its work even in daily continuous operation and you can enjoy a long service life.
The live display of sensor data is switchable, so that all relevant data is displayed in different views
Live data display of, for example:
- Fuel system status
- Intake air temperature
- Air mass / airflow
- Engine speed
- Vehicle speed
- O2 sensor position
- Coolant temperature
- Slow and fast correction
- etc…
Live data can, of course, also be read out while driving.
This is indispensable in professional troubleshooting. The device even offers the possibility to save fault memories and live data and view them again later.
Further advantages of our professional vehicle diagnostic tool:
- Easy-to-read color display
- Easy operation via seven buttons
- Error display in plain text and German
- Reads all fault codes (general and manufacturer-specific codes)
- Clears all codes in the control unit
- DTC clear and data stream reading possible
- bidirectional "special tests" possible (e.g., EVAP, O2 sensor, I/M readiness, MIL status, VIN info, On-Board Monitor Test)
- Resetting of inspection indicators, services possible
- immediately ready for operation, no batteries or laptop required
- Updatable via Internet and thus future extensions of existing functions possible. Printing of saved data via PC printer.
further supported control units:
- Engine electronics
- Airbag SRS
- Central electrics
- Automatic transmission
- ABS anti-lock braking system
- Auxiliary heating
- Central locking
- Air conditioning
- Rain sensor
- Diagnostic interface
- Navigation
- Radio
- Brake electronics
- Steering wheel electronics
- Immobilizer
- All-wheel drive
- Instrument cluster
- Sound system
- Steering angle sensor
- Clutch electronics
- Automatic headlight leveling
- Comfort system
- Parking aid
- Tire pressure
- Voice input system
- Wheel damping
- Chassis control
- Phone
- Diesel pump
- Battery charger
- Roof electronics
- Anti-theft alarm system
- TV tuner
- Power steering
- and much more…
Errors are displayed in German and plain text on a 4″ TFT LCD display! The device is multi-lingual; 5 languages can be selected (German, English, Dutch, French, Spanish).
In addition, the diagnostic function includes reading DTCs, clearing DTCs, reading data streams and much more.
Furthermore, it also supports the following bidirectional "special tests" such as: EVAP, O2 Sensor, I/M Readiness, MIL Status, VIN Info and ON-BOARD-MONITOR Tests. In addition to the powerful diagnostic function, our diagnostic device also has some special functions such as: Oil/Service Light Reset, EPB, SAS, etc.
It can also be updated to the latest version:
- Simply download the free update software from the manufacturer's website.
- Connect the device with the included USB cable and wait until the device serial number is automatically displayed.
- Start the update and update the device with the latest software version.
supported vehicles:
All vehicles must be OBD II compatible!
Access to engine control unit for:
- all European petrol vehicles from model year 2001 with OBD II
- all European diesel vehicles from model year 2004 with OBD II
Access to all control units for the following Mercedes Benz, Sprinter and Smart vehicle models:
- 107, 124, 126, 201
- A Class (W168, W169, W176, W177)
- AMG (190, 290, 298)
- B Class (242, 245, 246, 247)
- C Class (202, 203, 204, 205, 206)
- CL Class (215, 216,)
- CLA (217, 218)
- CLC (303)
- CLK Class (208, 209)
- CLS Class (218, 219, 257)
- E Class (207, 210, 211, 212, 213, 238)
- ED (243)
- EQC (293)
- G Class (461, 463, 464, 465)
- GL (164, 166)
- GLA (156, 247)
- GLB (247)
- GLC (253)
- GLE (167)
- GLK (204)
- GLS (167)
- M Class (163, 164, 166, 292)
- Maybach (240)
- R Class (251)
- S Class (140, 217, 220, 221, 222)
- SL Class (129, 230, 231)
- SLK Class (R170, R171, R172)
- SLR (199)
- SLS (197)
- Citan (415, 420)
- Sprinter (690.6, 901 to 906, 907, 909, 910)
- Vaneo (with OBD2 connection)
- Vito/ V Class/ Viano (447, 448, 638, 639)
- X (470, 471)
- Smart fortwo (A/C 450 and C/A 451)
- Smart Roadster (R/C 452)
- Smart (453)
- Smart forfour (W454)
Software status on 09.04.2025: MB, Maybach V35.10, Mercedes LD (Commercial Vehicles) V34.00, Smart V33.00
Technical data:
- Display: 4 inch TFT LCD, 480 x 320 pixels, color monitor with backlight
- Operating temperature: 0 – 50 degrees C
- Storage temperature: -20 – 70 degrees C
- Power: 9V – 18V
- Voltage range: 12V DC (directly from vehicle via OBD interface)
- Operating current: 150mA 12V (typical)
- Power consumption: 1.8 W (typical)
- Dimensions: Length 205mm x Width 110mm x Height 31mm
- Cable length approx. 600mm
- Connector type: Standard 16-pin OBD connector
- Weight: 350 grams
- Diagnostic device and manual
Included in delivery:
- Diagnostic device iCarsoft MB V3.0
- 16-pin OBD 2 diagnostic cable
- high-quality carrying case
- USB cable
- Micro SD memory card
- Instruction manual German, English
- Technical documentation